sym53c8xx: at PCI bus 0, device 12, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c810a detected with Symbios NVRAM
sym53c810a-0: rev=0x23, base=0xdf800000, io_port=0xd000, irq=4
sym53c810a-0: Symbios format NVRAM, ID 0, Fast-10, Parity Checking
sym53c810a-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/ce/a0/01/00/00
sym53c810a-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
03/ce/a0/00/08/00
sym53c810a-0: resetting, command processing suspended for 2 seconds
sym53c810a-0: restart (scsi reset).
scsi0 : sym53c8xx - version 1.3c
scsi : 1 host.
sym53c810a-0: command processing resumed
sym53c810a-0-<5,0>: phase change 2-6 6@00dffe45 resid=5.
sym53c810a-0: unexpected disconnect
sym53c810a-0-<5,0>: COMMAND FAILED (8a ff) @c2f58000.
sym53c810a-0-<5,0>: phase change 2-6 6@00dffe45 resid=5.
sym53c810a-0: unexpected disconnect
sym53c810a-0-<5,0>: COMMAND FAILED (8a ff) @c2f58000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
sym53c8xx_reset: pid=5 reset_flags=1 serial_number=0 serial_number_at_timeout=0
sym53c810a-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a syncronous reset.
sym53c810a-0: restart (scsi reset).
sym53c810a-0: command processing resumed
sym53c810a-0-<5,0>: phase change 2-6 6@00dffe45 resid=5.
sym53c810a-0: unexpected disconnect
sym53c810a-0-<5,0>: COMMAND FAILED (8a ff) @c2f58000.
sym53c810a-0-<5,0>: phase change 2-6 6@00dffe45 resid=5.
sym53c810a-0: unexpected disconnect
sym53c810a-0-<5,0>: COMMAND FAILED (8a ff) @c2f58000.
sym53c810a-0-<5,0>: phase change 2-6 6@00dffe45 resid=5.
sym53c810a-0: unexpected disconnect
sym53c810a-0-<5,0>: COMMAND FAILED (8a ff) @c2f58000.
any idears?
Steven Pritchard wrote:
DMW said:
[...]
> Furthermore, I did configure the SCSI drivers as modules, but there's no
> trace of anything scsi in the /etc/conf.modules. I guess I thought that
> building the kernel would do all that for me.Guess again. :-)
Try "alias scsi_hostadapter sym53c8xx" (or whatever driver you decided
to try) in /etc/conf.modules.Steve
--
steve@silug.org | Linux Users of Central Illinois
(217)698-1694 | Meetings the 4th Tuesday of every month
Steven Pritchard | http://www.luci.org/ for more info--
To unsubscribe, send email to majordomo@luci.org with
"unsubscribe luci-discuss" in the body.
--