[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: xcdroast
ah wait, i see something else in dmesg that could be tell tale:
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x50
ATAPI device hdd:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Read TOC" packet command was:
"43 02 00 00 00 00 00 00 04 00 00 00 "
________________________
Lunar Media Incorporated
what a wicked web we weave
http://www.lunarmedia.net
1 . 8 0 0 . 2 5 2 . 8 2 2 1
On Wed, 26 Apr 2000, Steven Pritchard wrote:
>
> Charles Menzes said:
> > So, I believe that I do have the necessary support enabled.
> > Jeff mentioned that you had to have the *right* scsi support enabled. Am I
> > missing something?
>
> Here's the process I go through. YMMV.
>
> First of all, I have *everything* modularized except what I absolutely
> have to have to boot (like IDE support and IDE disk support). If you
> have IDE CD-ROM support compiled in, or the ide-cd module loaded,
> it'll screw everything up.
>
> So, I start by loading the ide-scsi module. That finds the burner...
>
> osiris:~# modprobe ide-scsi
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: IOMEGA Model: ZIPCD 4x650 Rev: 1.04
> Type: CD-ROM ANSI SCSI revision: 02
>
> Then I verify that cdrecord can see the burner...
>
> osiris:~# cdrecord -scanbus
> Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling
> Using libscg version 'schily-0.1'
> scsibus0:
> 0,0,0 0) 'IOMEGA ' 'ZIPCD 4x650 ' '1.04' Removable CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
> This is what gets loaded in the process...
>
> osiris:~# lsmod
> Module Size Used by
> sg 15480 0 (autoclean)
> ide-scsi 6956 0
> scsi_mod 47428 2 [sg ide-scsi]
>
> To burn, I just do something like "cdrecord -v -eject dev=0,0,0
> speed=4 file.iso".
>
> Oh, I believe these are the relevant lines of my .config...
>
> CONFIG_BLK_DEV_IDE=y
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_BLK_DEV_IDECD=m
> CONFIG_BLK_DEV_IDESCSI=m
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_AUTO=y
> CONFIG_SCSI=m
> CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=m
> # CONFIG_SCSI_MULTI_LUN is not set
>
> (This might be different if you boot off SCSI or something...)
>
> Steve
> --
> steve@silug.org | Linux Users of Central Illinois
> (618)398-7320 | Meetings the 4th Tuesday of every month
> Steven Pritchard | http://www.luci.org/ for more info
>
> --
> To unsubscribe, send email to majordomo@luci.org with
> "unsubscribe luci-discuss" in the body.
>
--
To unsubscribe, send email to majordomo@luci.org with
"unsubscribe luci-discuss" in the body.